Care Kit Cleaning InstructionsUpdated 5 months ago

Follow these Care Kit cleaning instructions to keep your Merry People products looking merry and adventure ready!

Step 1: CLEAN

Wipe off any excess dirt/debris with a damp cloth or brush and allow to dry. If needed, use some mild detergent and repeat the process as required.

Step 2: TREAT

Shake the rubber treatment bottle well and insert the spray nozzle. Spray a few times on the microfibre cloth and apply evenly to the rubber in a circular motion. Repeat for the other foot and allow to dry completely.

Step 2: SHINE

To activate your Buff and Shine, pump the internal sponge spring multiple times and be patient as it makes its way through the sponge. For extra shine and protection, gently rub the Buff & Shine sponge in a circular motion over your Merry People's until a thin coat is evenly applied and allow to dry. Please note the concentrate recipe is mighty, so a little goes a long way! 

TAKE CARE

Caution: Use in a well ventilated area or outdoors and avoid breathing in the spray. If the solution gets into the eyes or skin, rinse thoroughly with water. If irritation persists seek medical attention.

Ensure no solution from the treatment or buffer is applied on the sole as this will cause slipping. If some ends up on the sole clean with mild detergent and dry before wearing.